Optimization of mechanical equipment configuration and maint

[quangongzi]

Highway construction enterprise machinery and equipment development, and highway construction market to adapt, we must optimize the scientific and effective mechanical equipment configuration and mechanical maintenance. Through the optimization and configuration of machinery and equipment maintenance, can improve the level of mechanization of machinery and equipment utilization, and fundamentally reverse the process of enterprise development machinery, "large and complete" and "small and the whole situation." Specifically, the first To achieve the leasing of machinery and equipment, the degree of mechanization of a construction unit, representing the strength of the unit and the construction level.Therefore, as the construction unit must have a certain amount of construction machinery, but the construction machinery can not "large and complete" Construction machinery for the main foreign advanced management experience, its own machinery share of 50, and the other by renting machinery to meet, which requires the original road to the subordinate units should be transferred to the mechanical method, the machinery of a unified allocation to a Units, which assume the mechanical management and leasing functions, and the provincial or municipal road bureau responsible for other to strengthen the mechanical maintenance, mechanical maintenance operations are mainly "clean, fasten, adjust, lubricate, anti-corrosion" Cross This is based on the law of changes in machinery and technology after years of practice drawn. In addition there are checks, add and other ancillary operations.Mechanical at work, its internal and external system of various parts of the dirt is inevitable, some The key parts of the dirty stains will make the machine does not work.Therefore, the cleaning operation is not only to maintain the cleanliness and hygiene, more importantly, in order to ensure the safety of machinery and normal work, cleaning work should pay special attention to the engine " "And the cleaning of electrical parts.Small Road Roller - Shanghai Doan Machinery Technology Co.,Ltd

 Realize Construction Supervision and Improve Personnel 's Quality
Most of the mechanical construction units of the project line length, point and more, not every project is equipped with a sufficient number of construction machinery, and construction units should be in accordance with engineering and technical requirements to develop realistic construction organization design, according to different stages of different quantities to configure the construction Machinery, which requires the construction supervision according to the terms of the contract and the quality of the project, the duration of the construction design and construction design, construction design according to the design of the individual projects and the various stages of the major equipment configuration, the construction of the order and time to adapt to the equipment approach , To reduce equipment idle. Then the construction supervision should be based on the construction unit construction design of the road construction machinery name, model, work ability, good condition, quantity, to the site and date to urge the timely delivery of the site, and the equipment and check the quantity , Inadequate equipment requirements of the construction unit filled, do not meet or do not meet the conditions for the construction period of withdrawal from the site. Before the completion of a project to participate in the project machinery, without the consent of the construction supervisors may not evacuate the site, in addition to dynamic tracking of construction machinery to understand the mechanical conditions and good condition and make records of the failure of equipment Should be adjusted.
roll compaction equipment
double grooved linear milling machine
crack router trucks accessories